Polishing drill bits for E-file manicure/pedicure, blue, 800 grit, extra fine
Set (4 pcs) of Silicone drill bits for polishing image 0
Polishing drill bits for E-file manicure/pedicure, blue, 800 grit, extra fine

Vendor:HBT

SIL-POL-4PC

Polishing drill bits for E-file manicure/pedicure, blue, 800 grit, extra fine

$3.00 AUD
Type
Type: 4-Piece Set

Pickup available at room b/433 South Road

Usually ready in 24 hours

Get everything you need for professional nail polishing. Each silicone polisher is designed to deliver a smooth, high-gloss finish without generating excessive heat.

Why Professionals Choose This Set

  • Silicone construction is gentle on both natural and artificial nails
  • All pieces are washable and disinfectable for salon-standard hygiene

Ideal For a perfect mirror finish on natural and artificial nails during hardware manicure and pedicure services.

Free Shipping $150+

Official STALEKS Partner

Australian Consumer Guarantee applies

Shipping options shown at checkout.
Specifications
Tool Type
Polishing drill bit set
Material
Silicone
Disinfection
Immerse in approved disinfectant solution
Sterilisation
Chemical sterilisation only — do not autoclave silicone
Care & Sterilisation

Keep your polishing drill bit performing at its best:

After each client: Rinse under running water to remove dust and debris. Silicone polishers can be gently wiped clean.

Disinfection: Immerse in your approved disinfectant solution. Note: some chemical disinfectants may affect silicone over time — check compatibility.

Sterilisation: Use chemical sterilisation only. Do not heat treat silicone tips — the material will lose its shape.

Storage: Store in a dry bit holder away from direct sunlight.

Replacement: Replace when the polishing surface is visibly worn, cracked, or no longer produces a smooth finish.

FAQs

What do the colour bands on drill bits mean?

The colour band indicates the grit (coarseness) of the drill bit. Blue is medium grit for general-purpose work like gel removal and surface prep. Red is fine grit for finishing and sensitive areas. Green is coarse for fast material removal. Yellow is extra-fine for polishing. Violet/purple is super-coarse for heavy-duty work. Black is extra-coarse for maximum material removal.

How do I sterilise nail drill bits?

After each client, brush debris from the flutes under running water using a brass cleaning brush. Soak in your approved disinfectant for the required contact time. Sterilise using autoclave (up to 134 degrees C), dry-heat oven, or chemical sterilisation. Carbide and diamond bits are compatible with all standard sterilisation methods. Dry thoroughly before storage.

What RPM should I use with nail drill bits?

For manicure work, 15,000-20,000 RPM is typical for gel and acrylic removal. For pedicure and callus work, 10,000-15,000 RPM provides good control. For cuticle work and natural nail finishing, keep below 15,000 RPM. Always start at a lower speed and increase gradually. Coarser bits generally require lower speeds than finer bits.

Which drill bit shape should I choose?

Corn (barrel) shapes are versatile for surface removal and nail shortening. Flame shapes are ideal for cuticle area cleanup and under-nail work. Ball shapes work well for sidewall cleanup and detailed cuticle work. Cone shapes are great for backfill and surface filing. Cylinder shapes provide flat, even surface preparation. Choose based on the area you are working on and the precision required.

Will this drill bit fit my e-file machine?

STALEKS PRO drill bits use the standard 2.35mm (3/32 inch) shank diameter, which fits the vast majority of professional e-file machines worldwide. This is the industry standard size. Check your machine specifications if you are unsure, but most professional nail drills accept 2.35mm shanks.