Sw106mK Polisher drill bit, cone, medium, 17 mm image 0

Vendor:Beauty Tools Australia

Sw106mK

Polisher drill bit, cone, medium, 17 mm

$16.00 AUD
Type
Type: Cone — 6mm x 17mm

Pickup currently unavailable at room b/433 South Road

Sign up to be the first to know when it's here

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Sw106mK medium-grit silicone cone polishing bit with a 6 mm tapered head and 17 mm working part for controlled nail buffing.

Key Features

  • Tapered cone — reaches cuticle margins and lateral folds with precision.
  • Medium grit — smooths surface imperfections before finer polishers.
  • 17 mm working part — versatile coverage across most nail sizes.
  • Silicone material — prevents heat build-up for client comfort.

Ideal For

Intermediate smoothing and buffing during hardware manicure and pedicure finishing.

Free shipping on orders over $249

Official STALEKS Partner

Australian Consumer Guarantee applies

Ships within 1-2 business days
Specifications
Tool Type
Polishing drill bit
Material
Silicone
Disinfection
Immerse in approved disinfectant solution
Sterilisation
Chemical sterilisation only — do not autoclave silicone
Grit
Medium
Shank Diameter
2mm
Head Shape
Cone
Head Diameter
6mm
Working Part Length
17mm
Care & Sterilisation

Keep your polishing drill bit performing at its best:

After each client: Rinse under running water to remove dust and debris. Silicone polishers can be gently wiped clean.

Disinfection: Immerse in your approved disinfectant solution. Note: some chemical disinfectants may affect silicone over time — check compatibility.

Sterilisation: Use chemical sterilisation only. Do not heat treat silicone tips — the material will lose its shape.

Storage: Store in a dry bit holder away from direct sunlight.

Replacement: Replace when the polishing surface is visibly worn, cracked, or no longer produces a smooth finish.

FAQs

What do the colour bands on drill bits mean?

The colour band indicates the grit (coarseness) of the drill bit. Blue is medium grit for general-purpose work like gel removal and surface prep. Red is fine grit for finishing and sensitive areas. Green is coarse for fast material removal. Yellow is extra-fine for polishing. Violet/purple is super-coarse for heavy-duty work. Black is extra-coarse for maximum material removal.

How do I sterilise nail drill bits?

After each client, brush debris from the flutes under running water using a brass cleaning brush. Soak in your approved disinfectant for the required contact time. Sterilise using autoclave (up to 134 degrees C), dry-heat oven, or chemical sterilisation. Carbide and diamond bits are compatible with all standard sterilisation methods. Dry thoroughly before storage.

What RPM should I use with nail drill bits?

For manicure work, 15,000-20,000 RPM is typical for gel and acrylic removal. For pedicure and callus work, 10,000-15,000 RPM provides good control. For cuticle work and natural nail finishing, keep below 15,000 RPM. Always start at a lower speed and increase gradually. Coarser bits generally require lower speeds than finer bits.

Which drill bit shape should I choose?

Corn (barrel) shapes are versatile for surface removal and nail shortening. Flame shapes are ideal for cuticle area cleanup and under-nail work. Ball shapes work well for sidewall cleanup and detailed cuticle work. Cone shapes are great for backfill and surface filing. Cylinder shapes provide flat, even surface preparation. Choose based on the area you are working on and the precision required.

Will this drill bit fit my e-file machine?

STALEKS PRO drill bits use the standard 2.35mm (3/32 inch) shank diameter, which fits the vast majority of professional e-file machines worldwide. This is the industry standard size. Check your machine specifications if you are unsure, but most professional nail drills accept 2.35mm shanks.